Atop
ATOP
Serial Modbus Gateways
Rugged Gateways
Serial & Modbus Gateways
Rugged Serial & Modbus Gateways
MB5904D Series - ATOP
Stokta Var (100 Adet)
211 görüntülenme
€0,00
KDV Dahil
Ürün Özeti
4-Port Industrial Secure Modbus TCP/RTU/ASCII Gateway with Optional 3kV isolation, DIN-rail mount, dual power input, wide-temperature
Industrial EMC protection, wide temperature operation, -40°C~85°C2...
Ürün Açıklaması
4-Port Industrial Secure Modbus TCP/RTU/ASCII Gateway with Optional 3kV isolation, DIN-rail mount, dual power input, wide-temperature
- Industrial EMC protection, wide temperature operation, -40°C~85°C
- 2 Fast-Ethernet ports or 100/1000 SFP slots
- 4 Software-selectable RS-232/RS-485/RS-422 serial ports, up to 921kbps
- Bi-Directional Modbus TCP/RTU/ASCII conversion from Serial to Ethernet and viceversa, VirtualCOM support, advanced Modbus Options available
- Isolated Redundant 12~48 VDC Power Inputs or powered (PoE models) through the Ethernet cable (802.3af)
- Embedded security with PPTP, IPsec or OpenVPN (client/server)
- Configuration via Web Browser/ Serial Console/ Telnet Console/ Utility
- Rugged metal case with wall or DIN-Rail mount
Diverse Hardware Infrastructure
Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422, and Ethernet. The ease-of use configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing communication infrastructure. Industrial EMC protection and wide temperature operation capability make MB5904D ready for every mission. And if cabling is an issue, the PoE-powered version can allow MB5904D to be powered through PoE.
Advanced embedded security and advanced features
Relax. MB5904D Modbus Gateway supports OpenVPN and IPsec VPN encryption, allowing you to safely use the device over the internet without worrying about malicious attacks, data sniffing or unintentional remote control of your Modbus slaves. On your LAN, RSTP protocol will provide an additional layer of security in case of link losses.
Switching between Modbus Protocols
Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. All of this, in bidirectional mode: Ethernet and Serial ends can selected to be either master or slave Modbus ID Routing. Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus hardware configuration into a simple network that can be easily managed.
ATOP MB5904D Serisi, endüstriyel uygulamalar için tasarlanmış son derece dayanıklı ve güvenilir bir çözümdür. -40°C ile +85°C arasındaki geniş sıcaklık aralığı, zorlu çevre koşullarında bile yüksek performans sağlar. IP30 koruma sınıfı ile donatılan metal kasası, dış etkenlere karşı mükemmel bir koruma sunarken, DIN-Ray montaj imkanı sayesinde kolay ve pratik bir kurulum süreci sağlar. Ayrıca, iki adet redundant güç girişi, sistemin kesintisiz çalışmasını garanti eder, bu da endüstriyel otomasyon sistemleri için kritik bir avantajdır. Modbus TCP/RTU/ASCII desteği ve sanal COM özellikleri ile ATOP MB5904D, Türkiye'deki endüstriyel uygulamalar için mükemmel bir uyum ve esneklik sunmaktadır.
Teknik Özellikler
| EMC | FCC Part 15, Subpart B, Class A EN 55032, EN 61000-3-2, EN 61000-3-3, EN 55024, EN 61000-6-2, EN 61000-6-4 |
| MTBF | 14.56 Years (according to MIL-HDBK-217F) |
| Mode | RS-232/422/485, software selectable |
| RoHS | Yes |
| v0.7 | Datasheet EN |
| v0.8 | Datasheet EN |
| v0.9 | Datasheet EN |
| v1.0 | SE-MB-PG5904D Certifications UL |
| v1.1 | SE5904D/MB5904D/PG5904D Hardware Installation Guide |
| v1.3 | MB59XX User Manual |
| v1.4 | MB59XX User Manual |
| Ports | 4 |
| Shock | MIL-STD-810G Method 516.7 |
| Speed | USB 2.0 |
| v1.68 | MB59XX Firmware |
| v1.77 | MB59XX Firmware |
| v5.20 | Management Utility for Windows |
| v5.60 | Management Utility for Windows |
| Parity | None, Odd, Even |
| Safety | IEC/EN 61010-1, UL61010-1, IEC/EN 61010-2-201, UL61010-2-201, EN62368-1 |
| Weight | 1,000g |
| v1.68c | MB59XX Firmware (Download and install this file first if your present firmware version is 1.46 or earlier) |
| GDC-120 | 59906861G |
| Housing | IP30 SPCC housing |
| LAN Mode | Dual Subnets or Network Redundancy |
| Warranty | 5 Years |
| Baud Rate | 1,200~921,600 bps |
| Connector | 7-Pin 5.08mm Lockable Terminal Block |
| Data Bits | 7,8 |
| Isolation | 2 KV |
| Protocols | IPv4, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, HTTPS, Telnet, RFC2217, RSTP, Security via PPTP, OpenVPN Client/Server or IPsec (peer-to-peer or peer-to-side) with up to 37.9Mbps VPN throughput,SMTP/TLS |
| SDR-75-24 | 50500752240001G |
| Stop Bits | 1,2 |
| USB Ports | 1 |
| Vibration | MIL-STD-810G Method 514.7 |
| VirtualCOM | Windows/Linux redirection software |
| Installation | DIN-Rail , Wall mount (optional kit) |
| Relay Output | 1A @ 30 VDC (normal open) |
| Reset Button | Yes |
| Configuration | Atop Management Utility, Web UI, Telnet |
| IEC 61000-4-2 | ESD |
| IEC 61000-4-3 | RS |
| IEC 61000-4-4 | EFT |
| IEC 61000-4-5 | Surge |
| IEC 61000-4-6 | CS |
| IEC 61000-4-8 | PFMF |
| Input Voltage | Dual 12 - 48VDC (non-PoE Models); or through Ethernet Cable (PoE versions) |
| MB5904D-4P-DB | 1P1MB5904D0004G |
| MB5904D-4P-TB | 1P1MB5904D0005G |
| WMK-450-Black | 70100000000052G |
| ADP-DB9(F)-TB5 | 59906231G |
| AXGD-1354-0523 | 522AXGD1354001G |
| AXGD-1354-0533 | 522AXGD1354011G |
| AXGD-3354-0593 | 522AXGD3354001G |
| AXGD-5854-0513 | 522AXGD5854001G |
| MB5904D-4P-Sis | 1P1MB5904D0006G |
| Connector ports | 2x 10/100BASE-T(X) RJ-45 or 2x 100/1000 Base-X SFP Slots (SFP version) |
| Drop (Freefall) | MIL-STD-810G Method 516.7 |
| Power Redundancy | Yes |
| MB5904D-4P-PoE-DB | Contact Headquarter |
| MB5904D-4P-PoE-TB | Contact Headquarter |
| Power Consumption | Approximately 8 W (Max) |
| MB5904D-4P-PoE-Sis | Contact Headquarter |
| MB5904D-4P-G-DB-SFP | 1P1MB5904DG001G |
| MB5904D-4P-G-TB-SFP | 1P1MB5904DG002G |
| Modbus concentrator | Optional - please ask your ATOP Representative |
| Storage Temperature | -40°C~85°C (-40°F~185°F) |
| MB5904D-4P-G-Sis-SFP | 1P1MB5904DG003G |
| Dimension (W x H x D) | 55 x 145 x 113 mm |
| Operating Temperature | -40°C~85°C (-40°F~185°F) |
| PoE standard supported | IEEE 802.3 af (-PoE version only) |
| Input Current (@ 12VDC) | 0.65 A @ 12 VDC |
| CBL-RJ45(8P)-DB9(F)-90-C | 50891971G |
| Ambient Relative Humidity | 5%~95%, 55°C (Non-condensing) |
| Reverse Polarity Protection | Yes |
| Modbus redundant concentrator | Optional - please ask your ATOP Representative |
| Modbus Gateway Supported Modes | Ethernet: Modbus TCP Server/Client(or VCOM); Serial: Modbus RTU/ASCII (master/slave) |
| Maximum number of Modbus clients/slaves | Modbus TCP: Maximum 16 clients; Maximum 32 slave connections |
| Marka | ATOP |
| Model | MB5904D Series - ATOP |
| Ana Kategori | Atop |
Kargo & İade Bilgileri
Kargo Bilgileri
- 2-3 iş günü içinde kargoya verilir
- 500 TL üzeri ücretsiz kargo
- Sigortalı gönderim
İade & Değişim
- 14 gün içinde iade hakkı
- Orijinal ambalajında iade
- Hızlı işlem garantisi
