SS100 - ATOP

Compact plug-on RS-232 to RS-485/422 media converter

• Maximum Communication Speed: 500Kbps
• Industrial Grade Temperature: -40~85°C
• ESD Protection (IEC 61000-4-2: ESD level 3 protection)
• External power not required (When RTS/DTR signal line is enabled)
• Compact size
• Hardware-based Auto Toggling
• RS422/RS485 mode selectable by external switch
• Built-in 120Ω termination resistors, selected by external switch
• 3kV isolation
• LED port power indicator

The SS100/SS100SiS media converters provide complete signal conversion between RS-232 and RS-422/485, without requiring an external power source. It is a fast and efficient solution to overcome distance limitations of RS232 or for connecting to industrial devices with an RS422/RS485 interface. The converters support both half-duplex 2-wire RS-485 and full-duplex 4-wire RS-422/485, and you could select mode via DIP switch without extra software required. Automatic data direction control is provided for RS-485. In this case, the RS-485 driver is enabled automatically when the circuitry senses the TxD output from the RS-232 signal. This means that no programming effort is required to control the transmission direction of the RS-485 signal.   Port Power over RS232 The RS-232 port of the SS100/SS100SiS is a DB9 female socket that can connect directly to the host PC, using the RTS/DTR lines to receive the power needed to run. Regardless of whether the signal is high, the can obtain enough power from the data line. SS100-SiS, the version with isolation, still requires an external power supply. When there are many devices connected to RS422 or RS485 signal lines, we recommend that external power supply is necessary.   LED Port Power Indicator It is easy to let the SS100 test the device for you. Simply connect the SS100 to the device’s RS-232 port and set the RS485 Echo mode. If the power port LED indicator of PWR/Tx/RX lights up, then SS100 is receiving enough power and data communication is working properly.