Atop
ATOP
Serial Modbus Gateways
Rugged Gateways
Serial & Modbus Gateways
Rugged Serial & Modbus Gateways
MB5908 Series - ATOP
In Stock (100 items)
243 views
€0,00
VAT Included
Product Summary
8-Port Industrial Secure Modbus TCP/RTU/ASCII Gateway with RJ45 connecters, Rack-mount, optional Serial Port Isolation
Industrial EMC protection, Opt. Serial port Isolation, -20°C~70°C operation2 Fast...
Product Description
8-Port Industrial Secure Modbus TCP/RTU/ASCII Gateway with RJ45 connecters, Rack-mount, optional Serial Port Isolation
- Industrial EMC protection, Opt. Serial port Isolation, -20°C~70°C operation
- 2 Fast-Ethernet ports, dual-subnet or redundancy
- 8 sw-selectable RS-232/485/422 RJ45 serial ports, up to 921kbps
- 24~48 VDC Power Input or 100~240 VAC Power input (EU or US version)
- Bi-Directional Modbus TCP/RTU/ASCII conversion from Serial to Ethernet and viceversa, VirtualCOM support, advanced Modbus Options available
- Supports SNMPv1/v2c/v3, Embedded security with IPsec VPN
- Configuration via Web Browser / Serial Console / Telnet Console / Windows Utility / LCM Matrix
- Integrated RSTP redundancy
Diverse Hardware Infrastructure
Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422, and Ethernet. The ease-of-use configuration utility provided with Modbus Gateway can quickly select the hardware interface, and easily switch to the existing communication infrastructure. You could set it up via Web Browser, Serial Console, Telnet Console, Windows Utility or through the LCM display in front of the device. Industrial EMC protection makes MB5908 ready for every mission.
Security and Redundancy
MB5908 embeds OpenVPN and IPsec VPN, that allows you to tunnel your data securely throught the internet and prevent unauthorized control of your Serial Devices by malicious people. The integrated Rapid Spanning Tree Protocol (RSTP), allows you to add a backup Ethernet link in the event the primary one fails.
Switching between Modbus Protocols
Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. All of this, in bidirectional mode: Ethernet and Serial ends can selected to be either master or slave
Modbus ID Routing
Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus
hardware configuration into a simple network that can be easily managed.
The ATOP MB5908 Series offers industrial durability and reliability, ensuring high performance even in challenging working conditions. With a wide temperature range of -40°C to +75°C, this device guarantees seamless operation across various industrial applications. The IP30 protection class and DIN-Rail mounting options facilitate secure placement and protection of the unit. Additionally, the redundant power input enhances system safety by ensuring continuous energy supply. Ideal for industrial applications in Turkey, this model provides a reliable solution particularly in energy, automation, and manufacturing sectors. The advantages of the MB5908 Series not only enhance operational efficiency but also reduce costs through its long-lasting performance.
Technical Specifications
| EMC | FCC Part 15, Subpart B, Class A EN 55032, Class B, EN 61000-3-2, EN 61000-3-3, EN 55024 EN 55032, Class B, EN 61000-3-2, EN 61000-3-3, EN 55024 |
| Drop | MIL-STD-810G Method 516.7 |
| Fuse | 50709441G |
| MTBF | SE5908-DC: 22.74 years; MB5916-US/EU: 13.95 years; SE5908-SiS-DC: 19.00 years; MB5908-SiS-US/EU: 19.03 years SE5916-SiS-DC: 13.38 years; MB5916-SiS-US/EU: 13.38 years MB5908-DC: 22.74 years; MB5916-US/EU: 13.95 years; MB5908-SiS-DC: 19.00 years; MB5908-SiS-US/EU: 19.03 years MB5916-SiS-DC: 13.38 years; MB5916-SiS-US/EU: 13.38 years |
| v0.5 | Datasheet EN |
| v0.6 | Datasheet EN |
| v0.7 | Datasheet EN |
| v0.8 | Datasheet EN |
| v0.9 | Datasheet EN |
| v1.0 | Linux_Driver_x64 |
| v1.3 | MB59XX User Manual |
| v1.4 | MB59XX User Manual |
| v2.0 | SE5908-SE5916-MB5908-MB5916-PG5908-PG5916 Hardware Installation Guide |
| Ports | 8 |
| Shock | MIL-STD-810G Method 516.7 |
| Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) |
| v1.68 | MB59XX Firmware |
| v1.77 | MB59XX Firmware |
| v5.20 | Management Utility for Windows |
| v5.60 | Management Utility for Windows |
| Parity | None, Odd, Even, Space, Mark |
| Safety | EN60950-1:2006; EN62368-1 |
| Weight | 3,000g (8-port version); 3,200 g (16-port version) |
| v1.68c | MB59XX Firmware (Download and install this file first if your present firmware version is 1.46 or earlier) |
| GDC-120 | 59906861G |
| Housing | IP30, SPCC housing |
| LAN Mode | Dual Subnets or Network Redundancy |
| Warranty | 5 Years |
| Baud Rate | 1,200 ~ 921,600 bps software selectable |
| Connector | DC version: 5.08mm 3-pin Lockable Terminal Block EU-US version: IEC 60320-1 C14 AC Power Inlet |
| Data Bits | 5, 6, 7, 8 software selectable |
| Isolation | 2.5 kV (Sis versions only) |
| MB5908-DC | 1P1MB590800001G |
| MB5908-EU | 1P1MB590800013G |
| MB5908-US | 1P1MB590800003G |
| Protocols | IPv4, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, HTTPS, SMP/TLS, Telnet, RFC2217, RSTP, Security through OpenVPN and IPsec (host-to-host or host-to-side) with up to 37.9Mbps VPN throughput, and PPTP |
| SDR-75-24 | 50500752240001G |
| Stop Bits | 1, 2 software selectable |
| Vibration | MIL-STD-810G Method 514.7 |
| VirtualCOM | Windows/Linux redirection software |
| Flow Control | None, Xon/Xoff, RTS/CTS (RS-232 only) |
| Installation | 19’’ Rack-Mount (Kit included) |
| Relay Output | Yes (1) |
| Reset Button | Yes |
| Configuration | Atop Management Utility, Web UI, Telnet, Serial Console, LCM Display |
| IEC 61000-4-2 | ESD |
| IEC 61000-4-3 | RS |
| IEC 61000-4-4 | EFT |
| IEC 61000-4-5 | Surge |
| IEC 61000-4-6 | CS |
| IEC 61000-4-8 | PFMF |
| Input Current | DC version: 0.54 A @24VDC; US-EU version: 0.21A@100VAC |
| MB5908-SiS-DC | 1P1MB590800002G |
| MB5908-SiS-EU | 1P1MB590800014G |
| MB5908-SiS-US | 1P1MB590800004G |
| RMK-718-Black | 70100000000040G |
| IEC 61000-4-11 | DIP |
| AD17-24C (US-Y) | 50500151240002G |
| AD17-24D (EU-Y) | 50500151240012G |
| Connector ports | 2x 10/100BASE-T(X) RJ-45 |
| Power Cable (EU) | 50801051G |
| Power Cable (US) | 50801041G |
| Power Redundancy | No |
| Power Consumption | Approximately 21 W (Max) |
| Input Voltage Range | DC version: 24-48VDC; US-EU version: 90-264 VAC (EU or US Plug) |
| Modbus concentrator | Optional - please ask your ATOP Representative |
| Storage Temperature | -40°C~85°C (-40°F~185°F) |
| Rated Supply Voltage | DC version: 24-48VDC; US-EU version: 100-240 VAC (EU or US Plug) |
| Dimension (W x H x D) | 436 mm x 43.5 mm x 200 mm |
| Operating Temperature | -20°C~70°C (-4°F~158°F) |
| CBL-RJ45(8P)-DB9(F)-90 | 50891791G |
| CBL-RJ45(8P)-DB9(M)-90 | 50891781G |
| CBL-RJ45(8P)-DB9(M)-200 | 50891951G |
| CBL-RJ45(8)-DB9(F)-200-C | 50891961G |
| CBL-RJ45(8P)-DB9(F)-90-C | 50891971G |
| Ambient Relative Humidity | 5%~95%, 55°C (Non-condensing) |
| Reverse Polarity Protection | Yes (DC version only) |
| Modbus redundant concentrator | Optional - please ask your ATOP Representative |
| Modbus Gateway Supported Modes | Ethernet: Modbus TCP Server/Client(or VCOM); Serial: Modbus RTU/ASCII (master/slave) |
| Maximum number of Modbus clients/slaves | Modbus TCP: Maximum 16 clients; Maximum 32 slave connections |
| Brand | ATOP |
| Model | MB5908 Series - ATOP |
| Main Category | Atop |
Shipping & Returns Information
Shipping Information
- Shipped within 2-3 business days
- Free shipping over 500 TL
- Insured shipping
Return & Exchange
- 14 days return right
- Return in original packaging
- Fast processing guarantee
