Atop
ATOP
Serial Modbus Gateways
Rugged Gateways
Serial & Modbus Gateways
Rugged Serial & Modbus Gateways
MB5908A Series - ATOP
In Stock (100 items)
181 views
€0,00
VAT Included
Product Summary
8-Port IEC61850-3 Certified Industrial Rack-Mount Secure Modbus Gateway, DSub-9 or TB5 connectors, Optional 3kV Serial Isolation, Dual Power input
Remotely access Modbus RTU/ASCII devices, convert to...
Product Description
8-Port IEC61850-3 Certified Industrial Rack-Mount Secure Modbus Gateway, DSub-9 or TB5 connectors, Optional 3kV Serial Isolation, Dual Power input
- Remotely access Modbus RTU/ASCII devices, convert to Modbus TCP
- Supporting advanced Modbus Features. Configuration via Web Browser
- IEC61850-3 certified, can be easily set up into IEC61850-3 substations
- Industrial EMC protection, wide temperature operation, -40°C~80°C
- Redundant Power Input for fault protection, either 24~48 VDC or High-Voltage AC/DC (100~240VAC or 100~370VDC)
- 6 Fast-Ethernet interfaces, either RJ45 or SFP slot
- 8 RS-232/RS-485/RS-422 Serial ports, with or without isolation
- Supporting VirtualCOM, embedded security with IPsec VPN
- Configuration via Web Browser/ Serial Console / Telnet/ Windows Utility
Diverse Hardware Infrastructure
Modbus Gateway supports the four most commonly used communication standards, RS-232/485/422(*), and Ethernet. The ease-of-use configuration utility provided with Modbus Gateway can quickly select the hardware interface , and easily switch to the existing communication infrastructure. Industrial EMC protection, IEC61850-3 compliance, and wide temperature operation capability render MB5908A ready for every mission.
Advanced embedded security
MB5908A embeds IPsec VPN Encryption, that allows you to tunnel your data securely throught the internet and prevent unauthorized control of your Serial Devices by malicious people.
Switching between Modbus Protocols
Modbus Gateway supports the standard Modbus protocol and is capable of converting any Modbus protocols between Modbus TCP, Modbus RTU, and Modbus ASCII for all supported hardware interfaces. All of this, in bidirectional
mode: Ethernet and Serial ends can selected to be either master or slave
Modbus ID Routing
Modbus Gateway supports various types of hardware communication interfaces, Modbus protocol conversion, and Modbus ID routing. Therefore the Modbus Gateway can integrate your existing and complex Modbus
hardware configuration into a simple network that can be easily managed.
* 3kV isolated version only supports RS-422/485
The ATOP MB5908A Series is a highly durable and reliable solution designed for industrial automation and control applications. With an operating temperature range from -40°C to +80°C, it is capable of withstanding harsh industrial environments, offering a wide range of application possibilities. The IP30 protection class ensures resistance against dust and debris, while the 19-inch DIN-Rail mounting option facilitates easy integration into your system. Additionally, the dual power input feature provides a reliable redundancy against power outages, ensuring uninterrupted operations in industrial applications across Turkey. These characteristics make the ATOP MB5908A Series an ideal choice for users seeking reliability and durability in industrial automation.
Technical Specifications
| EMC | FCC Part 15, Subpart B, Class A, EN 55032, Class A, EN 61000-6-2, EN 61000-3-2, EN 61000- 3-3, EN 55024, EN 61000-6-4, IEC 61850-3 / IEEE 1613 |
| MTBF | PG5900A: 16.60 years PG5916A-6SFP-Sis-HV: 9.18 years PG5916A-6SFP-Sis: 8.63 years |
| Mode | RS-232/422/485 Software selectable |
| RoHS | Yes |
| v0.5 | Datasheet EN |
| v0.6 | Datasheet EN |
| v0.7 | Datasheet EN |
| v0.8 | Datasheet EN |
| v0.9 | Datasheet EN |
| v1.0 | SE-MB-PG5900A-08A-16A Certifications LVD |
| v1.3 | SE5908-SE5916A-MB5908A-MB5916A-PG5900A-PG5908A-PG5916A Hardware Installation Guide |
| v1.4 | MB5908A Hardware Installation Guide |
| Ports | 8 |
| Shock | MIL-STD-810F Method 516.5 |
| Speed | IEEE 802.3 10BaseT IEEE 802.3u 100BaseT(X) - RJ45 version IEEE 802.3u 100Base-FX - SFP version |
| v1.68 | MB59XX Firmware |
| v1.77 | MB59XX Firmware |
| v5.20 | Management Utility for Windows |
| v5.60 | Management Utility for Windows |
| Safety | EN61010-1, EN 61010-2-201 |
| Weight | 4,000g |
| v1.68c | MB59XX Firmware (Download and install this file first if your present firmware version is 1.46 or earlier) |
| GDC-120 | 59906861G |
| Housing | IP30 SPCC housing |
| MB5908A | 1P1MB5908A0007G |
| Warranty | SE5916A-6SFP-Sis-HV: 9.18 years SE5916A-6SFP-Sis: 8.63 years PG5900A / PG5908A / PG5916A: 5 years |
| Baud Rate | 1,200 ~ 921,600 bps software selectable |
| Connector | 10-Pin Terminal Block |
| Data Bits | 5, 6, 7, 8 software selectable |
| Protocols | IPv4, ICMP, TCP, UDP, DHCP Client, SNMPv1,v2c,v3, HTTP, HTTPS, Telnet, RFC2217, 802.1D-2004 RSTP, Security through OpenVPN Client/Server or IPsec VPN (peer-to-peer or peer-to-side) with up to 37.9Mbps VPN throughput, PPTP, and SMTP/TLS |
| SDR-75-24 | 50500752240001G |
| Stop Bits | 1, 2 software selectable |
| Vibration | MIL-STD-810F Method 514.5 C1 & C2 |
| MB5908A-HV | 1P1MB5908A000AG |
| MB5908A-TB | 1P1MB5908A0008G |
| VirtualCOM | Windows/Linux redirection software |
| MB5908A-Sis | 1P1MB5908A0009G |
| Flow Control | None, Xon/Xoff, RTS/CTS |
| Installation | 19’’ Rack-Mount (Kit included) |
| MB5908A-6SFP | 1P1MB5908A0001G |
| Network mode | Independent IP address (6 ports) or Independent IP address (4 ports) + Unmanaged Switch (3 ports, including LAN4) |
| Reset Button | Yes |
| Configuration | Atop Management Utility, Web UI, Telnet |
| IEC 61000-4-2 | ESD |
| IEC 61000-4-3 | RS |
| IEC 61000-4-4 | EFT |
| IEC 61000-4-5 | Surge |
| IEC 61000-4-6 | CS |
| IEC 61000-4-8 | PFMF |
| Input Current | 0.73 A @ 24 VDC 0.35 A @ 100 VAC 0.20 A @ 100 VDC |
| MB5908A-TB-HV | 1P1MB5908A000BG |
| ADP-DB9(F)-TB5 | 59906231G |
| AXFD-1314-0523 | 522AXFD1314001G |
| AXFD-1314-0553 | 522AXFD1314011G |
| IEC 61000-4-11 | DIP |
| MB5908A-Sis-HV | 1P1MB5908A000CG |
| Connector ports | RJ45 x 6 (RJ45 version) SFP x 6 (SFP version) |
| Drop (Freefall) | MIL-STD-810F Method 516.5 |
| MB5908A-6SFP-HV | 1P1MB5908A0004G |
| MB5908A-6SFP-TB | 1P1MB5908A0002G |
| MB5908A-6SFP-Sis | 1P1MB5908A0003G |
| Power Redundancy | Yes |
| Serial Isolation | 3 kV isolation (SiS version only) |
| Power Consumption | Approximately 20 W (Max) |
| MB5908A-6SFP-TB-HV | 1P1MB5908A0005G |
| Input Voltage Range | Redundant 19.2-52.8 VDC or Redundant 85-264 VAC/ 100-370 VDC (HV Series) |
| MB5908A-6SFP-Sis-HV | 1P1MB5908A0006G |
| Modbus concentrator | Optional - please ask your ATOP Representative |
| Storage Temperature | -40°C~85°C (-40°F~185°F) |
| Rated Supply Voltage | Redundant 24-48 VDC or Redundant 100-240 VAC/ 100-370 VDC (HV Series) |
| Dimension (W x H x D) | 440.6 x 44 x 309 mm (1U Rack-mount) |
| Operating Temperature | -40°C~80°C (-40°F~176°F) |
| Ambient Relative Humidity | 5%~95%, 55°C (Non-condensing) |
| Reverse Polarity Protection | Yes |
| Modbus redundant concentrator | Optional - please ask your ATOP Representative |
| Modbus Gateway Supported Modes | Ethernet: Modbus TCP Server/Client(or VCOM); Serial: Modbus RTU/ASCII (master/slave) |
| Maximum number of Modbus clients/slaves | Modbus TCP: Maximum 16 clients; Maximum 32 slave connections |
| Brand | ATOP |
| Model | MB5908A Series - ATOP |
| Main Category | Atop |
Shipping & Returns Information
Shipping Information
- Shipped within 2-3 business days
- Free shipping over 500 TL
- Insured shipping
Return & Exchange
- 14 days return right
- Return in original packaging
- Fast processing guarantee
